|
|
Rank: Newbie Handicapper
Groups: Member
Joined: 6/9/2009
Posts: 4
Points: 12
Location: Williamson, GA.
|
I bought the program 06/09/09 and just bought a new cpu today, 07/11/09, and want to know if there is any way to move it from cpu to the other without getting the unregistered version using a flash drive.
K.B.S.
|
|
Rank: Newbie Handicapper
Groups: Member
Joined: 7/9/2009
Posts: 5
Points: -82
|
I doubt it...I beleive it ties the program to the origingal computer when you download the trial version thru the software ID and the key you get is based of that...I am pretty sure though if you write support he will give you another key but you will need to download the trial version to your new computer first and then send support you software ID for that machine...Someone correct me if this is wrong.
Bluedan
|
|
Rank: Newbie Handicapper
Groups: Member
Joined: 6/9/2009
Posts: 4
Points: 12
Location: Williamson, GA.
|
I have emailed support and comes up wrong address, tried Scott three times with no responce.
|
|
Rank: Newbie Handicapper
Groups: Member
Joined: 7/9/2009
Posts: 5
Points: -82
|
Haven't had any response as well from support this week as well. Hopefully, he is on vacation and nothing worse. I will let you know if I get thru to support...
Bluedan
|
|
Rank: Administrator
Groups: Administration
Joined: 6/8/2008
Posts: 47
Points: 153
Location: Clearwater, Florida
|
K.B.S. wrote: I bought the program 06/09/09 and just bought a new cpu today, 07/11/09, and want to know if there is any way to move it from cpu to the other without getting the unregistered version using a flash drive.
K.B.S. KBS, once you get the demo loaded onto the new computer, then send me the software ID code from that computer. I will issue a new registration key and remove the old registration key issued with your old computer.
Good handicapping! Scott www.GreyhoundMaster.com
|
|
Rank: Administrator
Groups: Administration
Joined: 6/8/2008
Posts: 47
Points: 153
Location: Clearwater, Florida
|
Bluedan wrote:Haven't had any response as well from support this week as well. Hopefully, he is on vacation and nothing worse. I will let you know if I get thru to support...
Bluedan Sorry to all for my recent lack of response this month. I went on vacation around the 4th and then have been moving (slowly but surely) to a new house. I just now have my office set back up where I can focus a bit better.
Good handicapping! Scott www.GreyhoundMaster.com
|
|
Rank: Newbie Handicapper
Groups: Member
Joined: 6/9/2009
Posts: 4
Points: 12
Location: Williamson, GA.
|
I would just like to thank Scott for trusting me about the tranfer of my program. He did, and I have the full satifaction of greyhond masters. I ran a complete opt. of derby lane and of victoryland with no problem. That is what I wanted from the start but didnt know that he was on vacation. The program won me money the first trip to victoryland, but betting at Derby Lane. To many bumps and trouble at victoryland. If I could add some suggestion to the next upgrade, would be to tell what weights you are using when you print a tip sheet. The program says its using saved files but I would like to know what is on the tip sheet. Also is there there any way to program into the program the best post position for each dog, there might be, but havent got there yet. Thanks again for the new program, ITs GREAT
KBS
|
|
|
Guest |
